ARF IoTARF Otomasyon
EN
Sign in
RainFlow · Smart irrigation controller

Manage your irrigation from anywhere, securely.

RainFlow is a smart irrigation controller for your pumps, valves and sensors, operated from your phone or computer. Set up a program once and watering starts on its own at the scheduled time.

Field irrigationGreenhousesOrchardsGardens & landscapingWell & tank pumps
Developed in Türkiye
End-to-end encrypted connection
Remote software updates
Android, iPhone & computer
Features

Your whole field in your pocket

From pumps to valves, from programs to reports: everything you need to manage irrigation in a single app.

Remote on / off

Start pumps and valves with a single tap. See instantly which outputs are open and whether the pump is running.

16 irrigation programs

Choose the days and a start time; in each step, open one or more valves for a duration set in hours and minutes.

Pump protection

The pump never starts before the valves are open. Between steps, valves open and close in sequence, so the pump never pushes against a closed line.

Alarms & notifications

Pressure, thermal overload, power, level and pump failure alarms, plus a warning if the device goes offline. They arrive even when your phone is locked.

History & reports

How long was each valve open? How many hours did the pump run? Get reports for any date range and export them to Excel.

Your own names

Name pumps, valves and sensors, e.g. “Well pump” or “Greenhouse 2”. Everyone using the device sees the same names.

Sharing & permissions

Share the device with your staff: an Operator can control it, a Viewer can only watch. Revoke access at any time.

Remote updates

New features and improvements reach the device over the internet. No site visit is needed to update it.

Sensors

Don't just control — measure

With advanced sensor support, RainFlow reads values in the field and shows them live; when a limit is exceeded, it alerts you or protects the pump on its own.

Pressure

Monitor line pressure live. If the pressure limit is exceeded, the pump stops and you get an alarm.

Flow & water meter

Live flow rate and total consumption: know how many litres each program delivered.

Tank & well level

The pump stops on its own when the tank is full and never runs dry when the level drops.

Temperature

Track air, water or greenhouse temperature and get alerts at the limits you set.

Humidity

Measure soil and air humidity to avoid unnecessary watering.

Power & thermal overload

If the power fails or the motor overload trips, the pumps stop safely and you are notified.

Other sensors can also be connected to suit your needs.

Irrigation programs

Set up a program, let RainFlow do the rest

No more opening and closing valves by hand at the same time every day. Enter your irrigation plan once; the device starts it on its own when the time comes.

  • Starts on the days and at the time you choose
  • Several valves can open together in each step
  • Durations are set in hours and minutes
  • Programs run on the device itself, so watering already under way continues even if the internet drops
  • Get notified when a program starts and finishes
1
Morning wateringNext: tomorrow 06:00
Days
MonTueWedThuFriSatSun
Start
Time06:00
PumpWell pump
Steps
1
Plot 1Plot 2
45 min
2
Greenhouse
1 h 15 min
3
OrchardFront lawn
30 min
3 stepsTotal 2 h 30 min
How it works

From the field to your pocket in four steps

Works with your existing pumps and valves. After installation, everything is managed from the app.

Panel installation

RainFlow connects to your irrigation control panel through its pump and valve outputs.

Internet connection

The device joins the Wi-Fi network on site. Where there is no fixed line, a 4G modem is enough.

Ownership card

Scan the QR code on the card supplied with the device in the app, and the device is linked to your account.

Start using it

Manage pumps, valves and programs from your phone or the web panel.

Security

Your device belongs to you alone

Security matters most in remote control. In RainFlow, ownership and communication are protected end to end.

Single-use ownership card

The code on the card can be used only once. The device belongs to the first account it is linked to.

No secrets on the label

Only the serial number is printed on the device. Someone who sees it on site cannot add it to their account.

Attempt alerts

If anyone tries to add your device to another account, you are notified by e-mail.

Encrypted connection

Every device has its own certificate. All traffic between device, server and app is encrypted.

ARF IoT

One platform, more devices on the way

RainFlow is the first product on the ARF IoT platform. Our new devices will run in the same app, under the same account, on the same security infrastructure.

Featured

RainFlow

Smart irrigation controller

Pump, valve and sensor control, 16 irrigation programs, alarms and reports — from your phone and computer.

Explore features
Coming soon

New ARF IoT devices

We are developing new monitoring and control devices for different needs in the field. All of them will be managed from the same app.

One account, one app Encrypted connection with a per-device certificate Remote software updates
App

On your phone and on your computer

Sign in with the same account on your phone, tablet or computer; whatever you change shows up everywhere instantly.

RainFlow Android app

Always with you, in the field and on the road.

  • Add devices by QR code
  • Alarms arrive even when the phone is locked
  • Programs, history and reports
Coming soon to Google Play

iPhone & iPad

In Safari, nothing to install.

  • Open panel.arfiot.com
  • Tap Share → Add to Home Screen for an app icon
  • Full control, programs and reports
panel.arfiot.com

Computer

In your browser, nothing to install.

  • All your devices together on a large screen
  • Download reports as Excel files
  • Edit programs and names
panel.arfiot.com

Let's talk about RainFlow for your irrigation

Contact ARF Otomasyon for installation, pricing and dealership information.